6061 aluminum plate aluminum fluorocarbon coating itself determines the function of the spray equipment must ensure a wonderful atomization effect, to ensure the average of the spray layer, the distribution of metal particles in the fluorocarbon paint, directly affecting the appearance of the coating. It is necessary to make comprehensive adjustments according to the actual situation of each casting, especially for certain quality defects. Firstly, the 6061 aluminum plate is fixed with the first set of rollers. The force at this time should not be too large. The aluminum plate is controlled to run to each of the two sets of wheels, and the second set of wheels is used to apply force to the 6061 aluminum plate. The third set of rollers is adjusted in the same way. Visually inspect the qualified product for shear testing. Each has its own characteristics.
The rolling pressure applied to the 6061 aluminum plate to the 6061 aluminum plate, the aluminum alloy, and the heat-insulating bridge is determined by the interval at which the pressure bar advances toward the aluminum plate. The main process parameters of forging should be set according to the forging time or the forging length, and the corresponding relationship of each process parameter is mastered. In addition, some forging preparations must be targeted. According to the 6061 aluminum sheets, alloys, specifications, and problems existing in the past, the production and quality of the products are targeted and necessary measures are taken.
The average coating and excellent quality of the 6061 aluminum fluorocarbon coating have a metallic luster, a bright color and a remarkable three-dimensional effect. Then, the 6061 aluminum plate is fixed, and the pressure bar pressure reading is adjusted to the scale value: the first group of rolling wheels 350N, the second group of rolling wheels 350N, and the third group of rolling wheels 280N. The use of fluorocarbon spray coatings on suitable spray equipment can result in uneven color, dark shadows or poor coating. The United States, Japan, Germany and other countries produce various types of various types of spray guns. It greatly affects the decorative effect of 6061 aluminum fluorocarbon. In order to achieve good spraying effect, high-voltage electrostatic electric spray guns are used.